Register | Sign In


Understanding through Discussion


EvC Forum active members: 60 (9209 total)
2 online now:
Newest Member: Skylink
Post Volume: Total: 919,463 Year: 6,720/9,624 Month: 60/238 Week: 60/22 Day: 1/14 Hour: 0/0


Thread  Details

Email This Thread
Newer Topic | Older Topic
  
Author Topic:   Moving to New Server
Admin
Director
Posts: 13107
From: EvC Forum
Joined: 06-14-2002


(3)
Message 31 of 131 (895662)
07-10-2022 10:52 AM


Move to New Server Fully Completed
EvC Forum is now running on the new server with no dependencies on the old. I decommissioned (deleted) the old server yesterday and it no longer exists (it was a virtual server, as is this one).
The new server has a couple additional features provided by an updated control panel that make it much more secure. The reason we moved to a new server was because while investigating persistent break-ins I discovered that the OS on the old server was being EOL'd, and so we'd have to move because though I could continue using the EOL'd OS, software providers would no longer support their software on it. In fact, this had already happened for the server's control panel, which stopped receiving updates around a year ago, as also had the firewall, which perhaps created a weakness that was exploited to break in.
The new server is running Almalinux 8.6. Almalinux is an open source version of Linux intended to fill the gap left by the EOL of Centos, our old OS. It calls itself a "1:1 binary compatible clone of RHEL" (Red Hat Enterprise Linux). Hopefully it will be around for a long time.

--Percy
EvC Forum Director

Replies to this message:
 Message 32 by AZPaul3, posted 07-10-2022 11:02 AM Admin has seen this message but not replied

  
AZPaul3
Member
Posts: 8654
From: Phoenix
Joined: 11-06-2006
Member Rating: 6.8


Message 32 of 131 (895664)
07-10-2022 11:02 AM
Reply to: Message 31 by Admin
07-10-2022 10:52 AM


Re: Move to New Server Fully Completed
Congratulations. Hardly any glitches at all. You made it look easy.

Stop Tzar Vladimir the Condemned!

This message is a reply to:
 Message 31 by Admin, posted 07-10-2022 10:52 AM Admin has seen this message but not replied

  
Admin
Director
Posts: 13107
From: EvC Forum
Joined: 06-14-2002


Message 33 of 131 (895694)
07-11-2022 11:49 AM


Thanks. The latest control panel features made moving the website itself over pretty easy. More challenging was becoming familiar with a bunch of behind-the-scenes changes related to security.

--Percy
EvC Forum Director

  
Admin
Director
Posts: 13107
From: EvC Forum
Joined: 06-14-2002


Message 34 of 131 (895725)
07-15-2022 1:09 PM


Minor Update
In a minute or two I'll be releasing minor changes that affect a lot of files. Please report any problems here.

--Percy
EvC Forum Director

  
Admin
Director
Posts: 13107
From: EvC Forum
Joined: 06-14-2002


Message 35 of 131 (895862)
07-22-2022 12:37 PM


Another Minor Update
I've just released a bunch of very minor code changes that affect a lot of files. Behavior of the discussion board is unaffected, but these changes make the code simpler and easier to support. Please post here if you encounter any problems.

--Percy
EvC Forum Director

Replies to this message:
 Message 36 by AZPaul3, posted 07-22-2022 6:44 PM Admin has seen this message but not replied

  
AZPaul3
Member
Posts: 8654
From: Phoenix
Joined: 11-06-2006
Member Rating: 6.8


(2)
Message 36 of 131 (895877)
07-22-2022 6:44 PM
Reply to: Message 35 by Admin
07-22-2022 12:37 PM


Do Nothing
Just so you know I am doing my part in testing certain functions I want to inform you that the "Do Nothing Button", while it doesn't do quite nothing, does function as expected.

Stop Tzar Vladimir the Condemned!

This message is a reply to:
 Message 35 by Admin, posted 07-22-2022 12:37 PM Admin has seen this message but not replied

  
dwise1
Member
Posts: 6076
Joined: 05-02-2006
Member Rating: 7.3


Message 37 of 131 (895882)
07-23-2022 2:44 AM


Lost Formatting in Peek
When I use the Peek button on a message, it strips out the embedded newlines. The dBCodes do show up, but the entire text is one big run-on. Basically the same thing as if you wrote an HTML page without any <BR> or <P> tags.
Same thing happens if I'm replying to a message and I click on the Peek Mode radio button.

Replies to this message:
 Message 38 by Admin, posted 07-23-2022 8:02 AM dwise1 has not replied

  
Admin
Director
Posts: 13107
From: EvC Forum
Joined: 06-14-2002


Message 38 of 131 (895883)
07-23-2022 8:02 AM
Reply to: Message 37 by dwise1
07-23-2022 2:44 AM


Re: Lost Formatting in Peek
Thanks for the tip. I've already fixed it.
What follows may fall under the "more than you wanted to know" category for some people.
This bug brought a larger problem to my attention. Older messages do not work with the new peek, so I'm simply going to rerender them, i.e., make them follow the same rendering rules as current messages.
But this will cause a change in their appearance. For example, in the prior rendering all quoted sections were followed by double spacing in the rendered message, whether the original text had double spacing or not. In the current rendering the spacing after a quote is up to the user: he can use either single or double spacing, his choice.
This means that an old message where the original text had single spacing after quotes was rendered with double spacing after quotes. When rerendered it will have only single spacing after quotes. If anyone objects to this type of change in old messages (older than a month) please post here.

--Percy
EvC Forum Director

This message is a reply to:
 Message 37 by dwise1, posted 07-23-2022 2:44 AM dwise1 has not replied

  
Admin
Director
Posts: 13107
From: EvC Forum
Joined: 06-14-2002


Message 39 of 131 (896669)
08-16-2022 3:56 PM


All Old Messages To Be Rerendered
As mentioned in the previous message, one of the changes over the past year or so caused old messages posted prior to March 15, 2021, to be improperly displayed when peeked at or edited in textboxes. For example, if this were part of the original message text in the textbox of an old message:
quote:
This is statement 1
This is statement 2
Then when edited or peeked at, instead of seeing the above just as in the original the user will see this:
quote:
This is statement 1<p>This is statement 2
I'm fixing this by rerendering all the old messages so that they appear exactly as originally entered when peeked at or edited. (For those unfamiliar with html, <p> begins a new paragraph.)
At the same time I'm fixing characters that were misrendered during a period when the unicode standard was being gradually defined and adopted. For example, sometimes apostrophes would be represented by the characters "’", resulting in this example from Message 33:
Oddly enough, “science teacher” isn’t the term I’d use.
This will be rerendered as:
Oddly enough, “science teacher” isn’t the term I’d use.
Bare URL's (e.g., URL's that don't appear inside the [URL] dBCode) will also be rerendered. This will cause many URLs to change from being just the text of the URL into actual text. For example, this:
Would become this:
As mentioned in my previous message, the vertical spacing in old messages will also change in some cases. For example, it used to be that there was always double spacing after [list], but now the vertical spacing will be the same as what was in the original text. If the text resumed on the line immediately following the list then there will be single spacing, while if there were additional lines after the list then double spacing will be used. It's possible to have more than double spacing, but you have to do it by including HTML tags like <br> or <p>.
I'll be beginning this rerendering effort soon, first backing up the database. It should take less than a day, but you shouldn't notice any performance issues or anything else.

--Percy
EvC Forum Director

Replies to this message:
 Message 40 by Admin, posted 08-22-2022 6:18 PM Admin has seen this message but not replied

  
Admin
Director
Posts: 13107
From: EvC Forum
Joined: 06-14-2002


(1)
Message 40 of 131 (896787)
08-22-2022 6:18 PM
Reply to: Message 39 by Admin
08-16-2022 3:56 PM


Re: All Old Messages To Be Rerendered
The rerendering of messages has been completed. All messages are now editable and peekable.

--Percy
EvC Forum Director

This message is a reply to:
 Message 39 by Admin, posted 08-16-2022 3:56 PM Admin has seen this message but not replied

Replies to this message:
 Message 41 by kjsimons, posted 08-24-2022 11:55 AM Admin has seen this message but not replied

  
kjsimons
Member
Posts: 829
From: Orlando,FL
Joined: 06-17-2003


Message 41 of 131 (896851)
08-24-2022 11:55 AM
Reply to: Message 40 by Admin
08-22-2022 6:18 PM


Re: All Old Messages To Be Rerendered
Are dbcodes working? I tried using the quote feature today and it didn't render.
Message: https://www.evcforum.net/dm.php?control=msg&m=896850#m896847

This message is a reply to:
 Message 40 by Admin, posted 08-22-2022 6:18 PM Admin has seen this message but not replied

Replies to this message:
 Message 42 by nwr, posted 08-24-2022 12:05 PM kjsimons has replied
 Message 43 by Theodoric, posted 08-24-2022 12:06 PM kjsimons has not replied

  
nwr
Member
Posts: 6484
From: Geneva, Illinois
Joined: 08-08-2005
Member Rating: 8.9


Message 42 of 131 (896853)
08-24-2022 12:05 PM
Reply to: Message 41 by kjsimons
08-24-2022 11:55 AM


Re: All Old Messages To Be Rerendered
Are dbcodes working? I tried using the quote feature today and it didn't render.
​Yes, they are working.
You used [\qs] where you should have used [/qs]

Fundamentalism - the anti-American, anti-Christian branch of American Christianity

This message is a reply to:
 Message 41 by kjsimons, posted 08-24-2022 11:55 AM kjsimons has replied

Replies to this message:
 Message 44 by Theodoric, posted 08-24-2022 12:07 PM nwr has seen this message but not replied
 Message 46 by kjsimons, posted 08-24-2022 1:06 PM nwr has seen this message but not replied

  
Theodoric
Member
Posts: 9489
From: Northwest, WI, USA
Joined: 08-15-2005
Member Rating: 6.2


Message 43 of 131 (896854)
08-24-2022 12:06 PM
Reply to: Message 41 by kjsimons
08-24-2022 11:55 AM


Re: All Old Messages To Be Rerendered
test writes:
test
I tested a few configurations. Everything looks fine for me. I did a peek on yours and don't see anything. I'll look again.

What can be asserted without evidence can also be dismissed without evidence. -Christopher Hitchens

Facts don't lie or have an agenda. Facts are just facts

"God did it" is not an argument. It is an excuse for intellectual laziness.

If your viewpoint has merits and facts to back it up why would you have to lie?


This message is a reply to:
 Message 41 by kjsimons, posted 08-24-2022 11:55 AM kjsimons has not replied

  
Theodoric
Member
Posts: 9489
From: Northwest, WI, USA
Joined: 08-15-2005
Member Rating: 6.2


Message 44 of 131 (896855)
08-24-2022 12:07 PM
Reply to: Message 42 by nwr
08-24-2022 12:05 PM


Re: All Old Messages To Be Rerendered
Ahh. Missed that.

What can be asserted without evidence can also be dismissed without evidence. -Christopher Hitchens

Facts don't lie or have an agenda. Facts are just facts

"God did it" is not an argument. It is an excuse for intellectual laziness.

If your viewpoint has merits and facts to back it up why would you have to lie?


This message is a reply to:
 Message 42 by nwr, posted 08-24-2022 12:05 PM nwr has seen this message but not replied

  
Admin
Director
Posts: 13107
From: EvC Forum
Joined: 06-14-2002


(1)
Message 45 of 131 (896858)
08-24-2022 12:18 PM


Bare Image URLs Now Accepted in Messages
This was just posted at Message 13 in the Astrogeomanity - the periodic table of human evolution. pseudoscientific or not?! thread where it first came to my attention.
Bare image URL's are now recognized by the software. You no longer have to write this:
[img]https://evcforum.net/Images/EvCForumLogo.gif[/img]
You can instead just write this:
https://evcforum.net/Images/EvCForumLogo.gif
In each case you'll get this:
When you use bare image URL's you won't be able to specify the width or the justification. For instance, this:
[img=400,right]https://evcforum.net/Images/EvCForumLogo.gif[/img]
Produces this:
It wouldn't be possible to do this with a bare image URL. Image URLs that are accepted are GIF, JPG, JPEG, PNG, SVG and ICO.

--Percy
EvC Forum Director

  
Newer Topic | Older Topic
Jump to:


Copyright 2001-2023 by EvC Forum, All Rights Reserved

™ Version 4.2
Innovative software from Qwixotic © 2024